How to Test Small Power & Lighting Systems

Small power and lighting systems are essential for homes, offices, and other buildings. While they may seem relatively simple, it's important to test them regularly to ensure they're functioning properly and safely. In this blog post, we'll discuss the steps you can take to test your small power and lighting systems.
Small Power Electrical Outlets Functional Testing:
Testing of electrical outlets is an easy way to test internal & external installed outlets. Here's how you can safely test your electrical outlets:
1. Before testing any electrical outlets check the drawing to be matched as per the approved load schedule.
2. Get the right tools to test your electrical outlets, need a Socket tester. This is a small handheld device that is designed to detect the presence of an electrical voltage & Polarization.
3. Check the socket outlets with all accessories, mounting brackets and are clean and free of damage.
4. Check & verify upstream loads from the FDB panel to electrical socket wires to be connected properly.
5. Check and verify the earth connection at sockets & FDB Panel.

Lighting System Testing: -
lighting Fixtures Functional Testing:
· The lighting Fixtures to ensure that Switches for lights are ON/OFF in proper working condition.
· Check the lighting fixtures with all accessories, mounting brackets, and switches are clean and free of damage.
· Lighting fixtures is connected properly with switches, Dimmers & lighting control panel.
· Check the outlets' polarity & grounding continuity, the live connection shall be on the right neutral on the left, and the earth at the top.
· Check & verify upstream loads from the FDB panel to lighting fixtures wires to be connected properly.
Measure the LUX Level of the lights:
· Place the meter on a flat surface to ensure a stable result and in a position that is most representative of someone using that space.
· Measure the ambient light level by turning off the light source to establish and record a baseline measurement.
· Turn on the light source and take a measurement when the light has achieved full brightness and full distribution.
· Note the differential by subtracting the ambient measurement from the illuminated light measurement. This ensures you are recording the amount of light that an existing light source produces.
· Check other areas of the room to ensure there is consistency, such as in corners or areas away from windows and natural light.