Product Introduction
High voltage phasing tester is a new type of phasing product, make sure that the phase position of two grids (generator group) is the same as parallel. The insulation tube adopts insulation material with high performance. The phasing meter is equipped with plastic shell matching movable supports, which make it easy to put the meter on an insulation tube and change the visual angle flexibly. Easy to install and operate.
HY-10kV is used for 6kV and 10kV power grids to check if the phases of two grids or generator sets are the same to confirm the connection.
HY-35kV is used for below 35kV power grids to check if the phases of the two grids or generator sets are the same to confirm the connection.
Product Parameter
Material characteristics
|
Item |
Unit |
Index |
|
Heat resistance (longitudinal), not less than |
℃ |
200 |
|
Shock resistance (longitudinal) not less than |
mpa/cm |
147 |
|
Bending resistance (longitudinal) not less than |
mpa |
343 |
|
Surface resistivity (after water immersed) is not lower than |
Ω |
10×1011 |
|
Volume resistivity (normal) not less than |
Ω/cm |
10×1031 |
Impact withstand voltage test
|
Rated voltage of Insulation components (kV) |
Impact withstand voltage (kV) |
Polar distance |
|
10 |
100 |
0.4 |
|
35 |
150 |
0.6 |
Insulation tube length and attenuation resistance parameters
|
Rated voltage(KV) |
Attenuation components |
Active length(M) |
Handheld length(M) |
Whole length(M) |
|
|
length(M) |
Resistance value(MΩ) |
||||
|
6-10 |
0.55～0.7 |
36～50 |
0.8 |
0.8 |
1.6 |
|
35 |
0.7～0.9 |
100～150 |
0.9 |
0.6 |
2.6 |
Identify the phase "instrument" signal response
|
Type |
High technology type |
|
|
|
Indication |
Language |
Light |
|
|
Different phase with 3 response signals |
Indicate corresponding voltage or digital indicate corresponding voltage |
Make a sound or language, please change the phase to operate if the phase is wrong. |
Bright |
|
Same phase without 3 response signals |
No indication |
No language |
Not bright |
Product Feature And Application
Regardless of whether the phases are identical or not, language and lighting will indicate when phasing.
A Low voltage of 220V or 380V can check if the phasing meter is normal.
The Auto power switch is set inside of phasing meter, the power will turn on automatically and turn off when not working, convenient and saves power.
Accessory
|
Number |
Name |
Amount |
|
1 |
Tester |
one |
|
2 |
Test line |
one |
|
3 |
Insulating rod |
one |
|
4 |
Specification |
one |
|
5 |
Inspection Report |
one |
|
6 |
Certification |
one |
FAQ
1. Delivery： Fast delivery and Flexible mode of transportation
2. Payment: Choose payment terms and payment way you convenient
3. Sale service: 24-hour online contact, Choose the right model of equipment according to your request, give the best offer, support customization
4. Warranty period: All machine quality guarantees for one year and lifetime technical support for you. Online response to customers' technical problems.
Customer Visit
On Site Service
Packing detail
Our service
01
Pre-sale service
Conduct product consultation, product promotion, and marketing activities, and technical support for customer needs.
02
Delivery service
Packing with wooden cases, provide different solutions of shipping way, accept different payment way. Save shipping cost and make sure the products arrive well.
03
After-sales service
Installation and commissioning of specific products; Respond to consumer questions, answer consumer inquiries, and deal with consumer comments.
Hot Tags: high voltage phasing tester, China high voltage phasing tester manufacturers, suppliers, factory, TDR Cable Fault Locator, clamp meter, Underground Cable Fault Distance Locator