• +86 159-6693-8328 tina@sinohipot.com
Zoom

FC-2GB Lightening Protection Components Tester
Applies to test the DC parameters of Oxide Zinc arrester (voltage dependent resistor), cermet second, third electrode discharge tube, vacuum lightning tube and others over-voltage protection components. With HV short circuit protection, over current protection, high voltage preset, range adjustment functions, HV self discharge time less than 0.5 second.
Introduction
Applies to test the DC parameters of Oxide Zinc arrester (voltage dependent resistor), cermet second, third electrode discharge tube, vacuum lightning tube and others over-voltage protection components. 
Features
1. Applies to test the DC parameters of Oxide Zinc arrester (voltage dependent resistor), cermet second, third electrode discharge tube, vacuum lightning tube and others over voltage protection components. It also can be considered as stable power source and constant current power supply.
2. With HV short circuit protection, over current protection, high voltage preset, range adjustment functions, HV self discharge time less than 0.5 second.
3. With self calibration function. 
4. LCD display, high precision, strong reliability.
5. Pre-set the measurement range when testing, there will be sound alarm if exceed the measurement range. 
6. Choose continuous measurement can make continuous test for mass measured equipments. 
7. Panel function is simple, easy to operate. 
8. Light in weight, easy to carry. 
Parameters

1. Voltage dependent resistor measurement

Technical Specifications Measurement range Maximum error Test Conditions
Voltage (U 1mA) (0~1999)V ≤±1%±1d 1mA±5μA
Leakage current (I 0.75U 1mA) (0.1 ~ 199.9 ) μA ± (2 μA +1d) 0.75 U1mA 
≤±2%±1d

 2. Discharge tube measurement

Technical Specifications Measurement range Maximum error Test Conditions
   DC breakdown voltage (V sdc) (5~1999)V ≤±1%±1d Rate of voltage rising 
100V/S±10%

 3. Other parameters

Insulating resistance 6MΩ(500V)
Voltage withstand AC1.5kV 50HZ 1min
Temperature and humidity 0~+40℃,≤85%RH
Storage temperature and humidity -10℃~+50℃,≤90%RH
Power supply DC12V dedicated power supply
Power consumption 8W
Dimension 208×190×78mm3
Weight ≤1kg


Accessory
Serial Number
Name Amount
1 Mainframe one
2 Test line (one red and one black, 1m) 
eleven
3 Texter one
4 Power one
5 Aluminium alloy case
one
6 Specification
one
7 Inspection Report
one
8 Certification
one

RELATED PRODUCTS
  • RG-H Automatic Capacitance Inductance Tester
  • FA-103 CT PT Volt-Ampere Characteristic Tester
  • GM Adjustable High Voltage Digital Megohm Meter
  • FC-2GB Lightening Protection Components Tester
  • DGC-H Cable Fault Detector
  • JYY-HS Oil BDV Tester(3 cup)
  • GKC-H Circuit Breaker Dynam...
  • JB-H Single Phase Relay Tester
Inquiry
Your Name:
E-mail:
Phone:
Title:
Content: