• +86 159-6693-8328 tina@sinohipot.com
Zoom

BC2565 Pointer Insulation Resistance Tester
Brief description: output voltage (2500V/5000V/10000V), the range of measuring resistance can reach 0~400GΩ, adopts embedded industrial microcontroller and real-time operating software system, with high degree of automation and strong anti - interference ability.
Introduction

Our BC2565 uses embedded industrial microcontroller real-time operating system, digital-analog pointer and digital segment display perfect combination, this series products with a variety of output voltage level (2500V, 5000V, 10000V), strong anti-interference, analog pointer with digital synchronous display, available for both AC and DC, simple operation, automatically save measurement results. It is the ideal test instrument for measuring insulation resistance for transformers, mutual inductors, generators, high-voltage motors, and arresters.

Features
1 Output voltage (500V、1000V2500V5000V), resistance measurement range 0~ 400GΩ.
2 Two ways synchronous display resistance value. The variation range of the insulation resistance can be easily observed by analog pointer, digisplay can easily read the test results.
3 Uses embedded industrial microcontroller real-time operating system. With high automation degree, strong anti-interference ability, auto saves test results.
4 Friendly interface, various measurement results against power failure function, can store the measurement results for 19 times.
5 If the instrument with high voltage, there will be prompt tone and with corresponding display.
6 AC/DC dual-use, built-in rechargeable battery and AC adapter. 
7 Portable design, convenient for field operation.
8 High voltage short circuit current1mA, it is an ideal insulation resistance tester to measure transformer, instrument transformer, generator, high voltage motor, power capacitor, power cable, arrester, etc
Parameters

Output voltage 2500V DC 5000V DC 10000V DC
Accuracy Temperature 23℃±5℃
Accuracy Insulation resistance 5M~100G ±5% 10M~200G ±5% 20M~400G ±5%
Other ranges:±10%
Temperature
2.5M~100G
5M~200G
10M~400G
0~+10%
0~+10%
0~+10%
HV short-circuit current ≥1mA
Power supply 8 AA batteries (8 AA rechargeable batteries, external charger)
Work environment Temperature:-10℃~40℃, Relative humidity: ≤85 %
Storage environment Temperature:-20℃~60℃, Relative humidity: ≤90 %
Insulation performance When the voltage between circuit and shell body is 1000V DC, the maximum resistance is 2000MΩ.
Withstand voltage properties When apply 3Kv/50Hz sine wave voltage between circuit and shell body, withstand voltage time is 1 minute.
Dimension 230×190×90mm (L×W×H)
Weight 2.5kg
Accessory Test wire, manual, certificate, charge adapter, power cord, AA batteries

Accessory

Serial Number
Name Amount
1 Mainframe one
2 High voltage cable 
one
3 Connection line 
two
4 Reference resistor
two
5 AC 220V Power line
one
6 Specification
one
7 Inspection Report 
one
8 Certification
one

RELATED PRODUCTS
  • RG-H Automatic Capacitance Inductance Tester
  • FA-103 CT PT Volt-Ampere Characteristic Tester
  • GM Adjustable High Voltage Digital Megohm Meter
  • FC-2GB Lightening Protection Components Tester
  • DGC-H Cable Fault Detector
  • JYY-HS Oil BDV Tester(3 cup)
  • GKC-H Circuit Breaker Dynam...
  • JB-H Single Phase Relay Tester
Inquiry
Your Name:
E-mail:
Phone:
Title:
Content: