• +86 159-6693-8328 tina@sinohipot.com

BC2550 Pointer Insulation Resistance Tester
Apply to: measuring insulation resistance of large capacity transformer, transformer, generator, high voltage motor and arrester. BC2550 model when the voltage is 2500V, the value will up to 100GΩ; when the voltage is 5000V, the value will up to 200GΩ.
With the rapid development of China's power industry, electrical equipment preventive experiment is an important part in protecting the safety operation of power system and maintenance. Insulation diagnosis is an important method to detect insulation defects or failure. Pointer insulation resistance tester is the special instrument to measure insulation resistance. JJG662-89 "insulation resistance meter (megger)" approved in May 1990 requires that insulation resistance meter is one of compulsory verification instruments. Nowadays the development trend of electrical equipment (such as transformers, generators, etc.) is that high capacity, high voltage, diversified structure and better seal. So insulation resistance meter (pointer) itself must have the characteristics such as large capacity, strong anti-interference ability, diversified measurement indexes, accurate measurement results, easy and fast measurement process, easy to carry and so on. The instrument produced by our company is equipped with ultra-thin taut suspension meter. It is an ideal tester to measure insulation resistance of these equipments such as transformer, instrument transformer, generator, HV motor, power capacitors, power cables, arrester, etc.

1 The instrument is used to do insulation test: when the voltage is 2500V, the value will up to 100GΩ; when the voltage is 5000V, the value will up to 200GΩ.
2 When rated output voltage of BC2550 tester continuously load, the resistance can be as low as 4MΩ/8MΩ/20MΩ, which makes the instrument can accurately measure lower insulation resistance.
3 Automatic conversion range, dual-scale display, and LED display corresponding color, it is easy to read.
4 Equipped with ABS plastic casing using, the instrument has strong anti-interference. Portable design, compact structure, and attractive appearance
5 The application of ultra-thin taut suspension meter to the instrument makes it have strong shock resistance capability.
6 AC/DC dual-use, built-in rechargeable battery and smart charging module, the whole output power is high (C type).
7 It is an ideal insulation resistance tester to measure these equipments such as transformer, instrument transformer, generator, high voltage motor, power capacitor, power cable, arrester, etc.


Model BC2550
Output voltage 2500V DC 5000V DC
Accuracy Temperature 23℃±5℃
Insulation resistance 5MΩ~100GΩ 10MΩ~200GΩ
±5% ±5%
Output voltage 20MΩ~100GΩ 40MΩ~200GΩ
0~+10% 0~+10%
HV short-circuit current ≥1mA
Power supply 8 AA batteries
Work environment Temperature:-10℃~40℃
Relative humidity: ≤85 %
Storage environment Temperature:-20℃~60℃
Relative humidity: ≤90 %
Insulation performance When the voltage between circuit and shell body is 1000V DC, the maximum resistance is 2000MΩ.
Withstand voltage properties When the voltage between circuit and shell body is 2500V DC, withstand voltage time is 1 minute.
Dimension 230×190×90mm
Weight 2kg
Accessory A set test line, the instrument manual, certificate

Serial Number
Name Amount
1 Mainframe one
2 Test line one
3 Specification
4 Inspection Report 
5 Certification

  • RG-H Automatic Capacitance Inductance Tester
  • FA-103 CT PT Volt-Ampere Characteristic Tester
  • GM Adjustable High Voltage Digital Megohm Meter
  • FC-2GB Lightening Protection Components Tester
  • DGC-H Cable Fault Detector
  • JYY-HS Oil BDV Tester(3 cup)
  • GKC-H Circuit Breaker Dynam...
  • JB-H Single Phase Relay Tester
Your Name: